About Fosroc Solutions
Fosroc is a global manufacturer of high performance chemicals and materials for the Construction industry.
Fosroc’s tailored Constructive Solutions are developed combining our extensive range of products with expertise and experience to meet the needs of the construction industry. From the cement factory through to final finishes of the construction project, Fosroc are your chosen partner for constructive solutions.
Cemax AE500
Cemax AE500 is a chloride - free additive based on anionic and non-ionic surfactants and amine based. Cemax AE500 acts on the interface of the cement particles and mixing water to produce microscopic air bubbles evenly distributed throughout the cement in the mortar paste of the cements.
View product
Auracast 100
Advanced low viscosity Super plasticiser, based on Polycarboxylic technology for Precast Concrete.
View productAuracast 102
Admixture for high early strength concrete for precast industry having cement replacement.
View productAuracast 404
Innovative admixture for High Early Strength concrete to produce Self Consolidating Concrete or Flow Concrete.
View productAuracast 405
High performance low viscosity PCE based admixture for high early strength for SCC & flow concrete.
View product
Auramix 201
Special polymer based concrete admixture for wide range of concrete grades.
View productAuramix 300
Auramix 300 is a unique combination of the latest generation superplasticisers , based on a polycarboxylic ether polymer with long lateral chains.
View productAuramix 300 Plus
Robust concrete admixture for long workability retention with good rheology.
View product
Auramix 350 DIS
High range water reducing and retarding type admixture for wide range of concrete grade.
View productAuramix 350 PQC
High performance PCE based admixture for wide range of pavement quality concrete grades.
View productAuramix 400
Auramix 400 is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long lateral chains.
View productAuramix 500
High performance admixture for Ultra high strength concrete, based on Polycarboxylic technology.
View product
Brushbond
Acrylic polymer modified cementitious waterproofing coating for concrete and masonry surfaces
View productBrushbond Roofguard
High build fibre Reinforced Acrylic Elastomeric Waterproofing render for roofing.
View productBrushbond TI Flexicoat
Elastomeric acrylic polymer based solar reflective and insulating coating
View productCebex EN
Cebex EN a plasticising and hydrogen free expansion grout admixture is supplied as a powder admixture. Cebex 200 allows the use of a reduced water / cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.
View productCemax 460
Cemax 460 is a liquid dispersing agent, for use as a grinding aid and Performance Enhancer for the production of Portland and other hydraulic cements. Cemax 460 complies with ASTM specification C 465 as a non harmful processing addition.
View productCemax AE600
Cemax AE600 is a chloride - free additive based on anionic and non-ionic surfactants and amine based. Cemax AE600 acts on the interface of the cement particles and mixing water to produce microscopic air bubbles evenly distributed throughout the cement in the mortar paste of the cements.
View product
Colpor 200
Cold applied, high performance, hydrocarbon resistant, polyurethane based pavement joint sealant
View productColpor 200PF
Cold applied, high performance, hydrocarbon resistant, polyurethane based pavement joint sealant
View product
Conbextra BB72 IN
Conbextra BB72-IN is supplied as ready to use powder which is blend of Portland cement, graded fillers and chemical additives which impart a controlled expansion in plastic stage while minimizing water demand. The addition of controlled amount of clean water produces a free flowing, Non shrink grout with high early and ultimate strength. The mixed material is suitable for grouting gaps ranging from 10mm - 100mm thickness.
View productConbextra BB92 O
Conbextra BB92-O is supplied as ready to use dry powder which is blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in plastic state while minimizing water demand. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout with high early & ultimate strength. The mixed material is suitable for grouting gaps ranging from 10 - 150 mm thickness
View product
Conbextra Cable Grout
Pre-bagged, non-shrink cementitious grout for post tensioned cables
View productConbextra Cable Grout HS
Conbextra Cable Grout is supplied as a ready to use grout. With addition of recommended amount of water the product yields a free flowing non-shrink grout. Conbextra Cable Grout is an all fines mix based on Portland cements and additives which impart High flow characteristics, Negligible bleed and controlled expansion in the plastic state whilst minimizing water demand.
View product
Conbextra EP10
Epoxy resin free-flow grouts conforming to the requirements of BS EN1504-3 Class R4 and BS EN 1504-6 Anchoring of reinforcing steel bar.
View product
Conbextra EUW
Conbextra EUW is a two part, low viscous epoxy resin system consisting of a water insensitive base and hardener.
View product
Conbextra TS
High-flow, non-shrink aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4
View productConbextra UHS90
Conbextra UHS is supplied as a ready-to-use grout, requiring only the addition of water to produce a free flowing non-shrink grout. The material is a blend of specially processed cement, pre-graded fillers and additives.
View productConcure 1315 (Clear)
Eco-friendly, acrylic resin based, clear curing compound, sealer and dust proofer.
View productConcure AB White
Concure AB White is an acrylic polymer based non-degrading, single component, white curing compound. It is also suitable for use as a sealer and dust proofer for floors and walls. Concure AB White Complies to ASTM C309 Type 2, class A - White version.
View productConcure LP90M Standard
Concure LP90(M) is an resin based, continuous film forming curing compound and is supplied as aluminised polymeric resin solution drying to a silver film on application. When first applied to a fresh cementitious surface the product forms a continuous, non-penetrating coating. This coating dries to a form a continuous film which provides a barrier to moisture loss ensuring more efficient cement hydration, improved durability and reduced shrinkage.
View productConplast Crystalline
Integral waterproofing admixture based on crystalline formation to produce water tight concrete.
View productConplast SP430SRV
Conplast SP430SRV is a dark brown liquid based on a blend of specially selected organic polymers
View productConplast SP440
High range water reducing, superplasticising and slump retaining admixture
View productConplast SP500
High performance water reducing and superplasticising admixture for microsilica concrete
View productConplast SP550
Conplast SP500 is a high range water reducing admixture for microsilica concrete.
View productConplast SP600
Conplast SP600 is a blend of organic polymers and is supplied as a brown liquid instantly dispersible in water.
View productConplast WL Xtra
Integral waterproofing liquid admixture for concrete, plaster and mortars.
View product
Dekguard E2000
Crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures
View productDekguard S
High performance aliphatic acrylic protective and decorative coating for concrete and masonry conforming to the requirements of BS EN 1504-2.
View productDekguard S Standard
Anticarbonation, aliphatic acrylate based protective and decorative coating for concrete and masonry.
View productDekguard S300
High build cement and aliphatic acrylate protective and decorative coating for concrete and masonry
View productDekguard Standard
Anticarbonation, aliphatic acrylate based protective and decorative coating for concrete and masonry
View productDekguard WB300
High performance elastomeric, protective coating for concrete and masonry
View productExpoband One
Expoband One is a flexible expansion joint membrane available in 1mm and 2mm thickness with width ranging from 100mm to 1m.
View product
Fosroc Membrane HDPE-P
Pre-applied HDPE pressure sensitive adhesive waterproofi ng membrane which bonds integrally to poured concrete slabs, remaining in place if settlement of substrate occurs.
View productFosroc Membrane HDPE-P(Smooth)RF
Pre-applied HDPE pressure sensitive adhesive waterproofing membrane which bonds integrally to poured concrete, remaining in place if settlement of substrate occurs.
View productFosroc Membrane HDPE-S
Post Applied Self Adhesive waterproofing membrane for vertical reinforced concrete members for below ground structures.
View product
Fosroc® Auramix V200
High performance viscosity modifying agent to ensure consistency and stability in High Fluid Concrete
View product
Hydroproof Xtra
Single component acrylic polymer for cement based waterproof composite coating membrane
View product